表面整饰度的不同

出处:按学科分类—工业技术 中国轻工业出版社《涂布加工纸技术手册》第167页(5209字)

虽然对大多数涂布来说,需要原纸有好的平坦的表面,也就是说有一定的平滑度,这更要呈现“微观的粗糙度”(fine roughness)方能摸到涂布的“钥匙”。刮刀涂布是这样要求的,而柔韧刮棒对此种要求则稍次些。我们在这里讲的是“微观的粗糙度”,而不是表示光滑性的粗糙度(gross roughness)。另一方面气刀涂布需要平滑度很高的原纸。

【参考文献】:

(1) 仕上、化纸、合成纸、涂工,纸パ技术协会,涂被用原纸P.408~418,堀内宗美,大久保幸—昭和45年.

(2) Techical Informafion,Aero Imcop,1986.Base Paper 00005 3/2~00012 3/2/5,1986.

(3) The Coating process,TAPPI Press,1997,Basestock Chapterl P.1~8,Gordon L.Stout Simens Eastern Consultant inc.

(4) 张景彦,侯维玲,陶永娟,张金英.涂布印刷纸及纸板表面微观特性和印刷适合性的关系.天津造纸,1991,43~52.

(5) The Coating process.TAPPI Press,1997,Section Ⅶ Coated Board,Terry Keliogg,Huber Corp.

(6) TAPPI J.Vol81.NO.5 Wood and how it related to paper products P.223~224.

(7) 西班牙桉树资源和桉树制浆考察报告,轻工部赴西班牙造纸工业考察组P.31.1980.

(8) TAPPI J Vol 81 NO.5 Wood and how if relates to paper products P.225.

(9) 造纸工业最新技术设备手册第二版,芬兰奥斯公司,P.30~41.

(10) 日本相川株式会社设备样本及“中华纸业”1998年第6期P.16.

(11) TAPPI,J.1997.Vol.80.NO.6.P.139.

(12) 常用非木材纤维法制浆实用手册1993,中国造纸学会碱法草浆专业委员会编着.

(13) 本书作者与生物学家合作研究试验成果摘要.

(14) 中国造纸协会、中国造纸学会代表团1998年访法、芬总结,P.11.17.

(15) 含50%麦草浆原纸的门辊涂布涂料配方的研究,陈祖恬等,1991,11.

(16) 草浆轻量涂布纸涂料工艺的研究,张美云等,1998.9.

(17) 加拿大好声牌HS型号漂白皮浆试验报告.

(18) 西班牙潘特维德拉厂、斯尼亚斯桑坦德浆厂试验报告,1980,10.

(19) 美国屋哈雅沃州某废纸浆厂报价浆质量试验报告,1995.2.

(20) 中华纸业,1998年,第6期P.32.

(21) PAPER ASIA Vol 14,NO.10,OCT.1998.P.16~18.

(22) TAPPI Stock Prep Minutes,April,12.1999.

(23) Overview of the foundamentals of papermaking FRC Reprint NO,2PPF Rsch Society England.

(24) TAPPI J.Vol 76 NO.9 SPF 1993 P.12~133.Effect of papermaking Variables.

(25) Trufitt,A.D.Design of Manifold Flowspreaders,CPPA Montreal 1975.PP.1~33.

(26) D Incau S TAPPI 1983 Engineering Conferenc Proceedings TAPPI Press Atlanta P.583.

(27) Steen M.Turbulence and flocculation in fiber suspensions D.E.thesis University of Trondhein Norway 1990(30)The fourdrinier thesis University of Trondhein Norway 1990.

(28) The role of fourdrinier table activity in the manufacture of various paper and board grades,TAP—PI.J.April 1992 Vol P.172~185.

(29) Grouth and decay of streaks and waves on the forming table,TAPPI.J.NO.5 May 1998 P.159~162.

(30) Conventional and stratified forming of office paper grades,TAPPI J.Vol 81.NO5 May 1998 P.149~158.

(31) A Fundamental Oppor tunity to Improve Paper Forming,TAPPI,J,Vol.79 NO.6 June 1996 P.55~60.

(32) TAPPI.J.Vol.78 NO.11,NOV.1995.P.89~95.

(33) Beloit Basis Weight Profiling with the Concept IV-MH & IV-MHTM Headbox Technical Summary,Scott B.Pantaleo,January 1995.

(34) PPI June 1996 P.66,The Actuators controlling dilution on PM3 Headbox.

(35) 华加公司气垫式流浆箱简介及说明书,1997.

(36) Paper News(Valmet)Vol.14.NO.4 1998 P.12~13.

(37) A Technical Summary(Beloit)Aaron Braaton 1.31.1995 Figl.2.

(38) Take a close look of this paper(B.T.G)HSM Sys.P.5.8.

(39) Paper News(Valmet)Vol.14,NO.2.1998.P.15.

(40) 中华纸业,1999年,1:19~20.杨伯钧.印刷纸纸机技术新发展.第2期P.33~35.

(41) 王锡元,王晓彬.造纸压光机整饰技术和设备的发展趋势.中华纸业,1999年,1:21~26.

(42) 吕江印,刘志一.靴形压榨.中华纸业,1998,6.

(43) What is good paper machine performance,TAPPI J.Sept 1992.P.129~133.

(44) 松香中性施胶技术和造纸湿部化学的研究,朱勇强博士论文,天津轻工学院1995年4月摘要.

(45) Rosin Sizing with Polyamine Mordants from pH 3 to10,TAPPI.J.May,1992 P.162~167.

(46) Neutral to alkaline rosin soap sizing with metal ions and polyethylenimine,TAPPI.J.Vol 78.NO.4 April 1995 P.155~162.

(47) A new sizing agent styrene-maleic anhydride copolymer with alum or ion mordant,TAPPI.J.Vol 80.NO.1 January 1997 P.277~282.

(48) The effect of SMA surface sizes on paper end-use properties,TAPPI J.Janury 1995.P.142~146.

(49) Applicaton of polymeric multifunctional carbonxylic acids to improve wetstrength,TAPPI.J.Vol81.NO.11.NOV.1998 P.159~164.

(50) Cationic latex as a multifanctional papermaking wetend additive,TAPPI J.,March 1999.Vol82.NO.3 P.175~187.

(51) Special Paper Chemicals.An overview TAPPI J.July 1995.Vo178.NO.7.P.66~68.

(52)“内部添加剂”.荒川化学工业(株)中小企业技术者研修制纸工学课程,P.19~22.

(53) Influence of base-paper filler content and pre-calendering on metered film press coating—paper and print quality,TAPPI J.May 1999 Vol.82 NO.5.P.94~100.

上一篇:涂料制备及供料系统设备 下一篇:厚度
分享到: